Point Guard MC 9005 HP


Description:

Point Guard MC 9005 HP is an extreme pressure additive containing emulsifying oil designed for heavy duty machining applications that have high-pressure systems, which can reach up to 3000 PSI. It is compatible for use on both ferrous and most non-ferrous metals. Point Guard MC 9005 HP contains a bio-resistance package that allows it to outlast other soluble oil type products. It provides excellent corrosion protection for steel, galvanized steel, zinc, aluminum and exotic metals.


Benefits:

  • EXTREMELY LOW FOAMING

  • EXCELLENT TOOL LIFE

  • EXTREMELY BACTERIA AND FUNGUS RESISTANT

  • LOW ODOR

  • NITRITE & DIETHANOLAMINE FREE

  • EXCELLENT CORROSION PROTECTION

  • DOES NOT REMOVE PAINT OR DAMAGE MACHINES

  • EXTREMELY HARD WATER STABLE


Lubricating Function:

Point Guard MC 9005 HP is designed to operate over a wide range of temperature dependent applications. The primary lubricating function lies upon activation of the extreme pressure additives to form a metallic-halide complex, which reduces the coefficient of friction and provides exceptional tool life and part finish. Additional lubrication is provided by petroleum oil and other additives, resulting in excellent film boundary lubrication between tool and part.


Monitoring Point Guard MC 9005 HP:

The concentration can be monitored by refractive index using a refractometer. The degrees Brix is equal to percent concentration.

Refractometer Chart:

Refractometer Chart.png

Mixing Instructions:

For most applications, Point Guard MC 9005 HP should be used in an operating range of 5-10% (20:1-10:1) for machining and 3-5% (33:1-20:1) for grinding. Always add Point Guard MC 9005 HP concentrate to water and not water to the concentrate. Mix the solution vigorously in a separate container prior to adding to system. This product is compatible for use with all types of pre-mixing equipment. The sump life of this coolant, as with any other, will be greatly enhanced if charged to a clean, bacteria-free system.


Laboratory Data:

  • APPEARANCE, CONCENTRATE: DARK AMBER, CLEAr

  • APPEARANCE, 5% DILUTION: LIGHT BLUE-GREEN, OPAQUE

  • SPECIFIC GRAVITY (g/mL): 0.997

  • POUNDS PER GALLON: 8.3

  • pH 5% DILUTION: 9.50 +/- 0.30

  • DIETHANOLAMINE: NONE

  • NITRITES: NONE

  • SULFUR: NONE

  • SARAH TITLE 313 REP. MATERIAL: NONE

  • HARD WATER STABILITY: >1000 PPM

  • FLASH POINT: 350° F Min.

  • FREEZE/THAW: PASS 3 CYCLES


Packaging:

Point Guard MC 9005 HP is available in 5 gallon pails, 55 gallon drums, and 275 gallon tote quantities.

*Refer to material safety data sheet for additional information about this product.